Digital Portable Handheld OLED Finger Blood Oxygen Pulse Oximeter
With 2 Batteries
Fingertip oximeter pulse oximeter, using infrared light technology,
through the finger skin and musculoskeletal
tissue after the brightness of light, accurate detection of human
blood oxygen saturation and pulse. Different
from blood collection test, high safety, no need to worry about
blood infection, no pain; high precision, accuracy
fully comply with the EU CE standard. So, what are the features of
the fingertip oximeter? Why not take a look!
Fingertip pulse oximeter has the following characteristics.
1, can monitor oxygen saturation, pulse parameters. And there is a
pulse pulse chart display.
2,Automatic shutdown function after about 8 seconds when there is
no signal.
3,Use two AAA batteries, low power consumption, the battery can be
used for 20 hours.
4,Low voltage alarm display.
5, the product is light, small size, easy to carry. Weight: 50g
(including 2 batteries); with lanyard: easy to hang
around the neck, but also 6, into the pocket.
7, easy to use, one key operation.
8,Have high accuracy and repeatability.
The above is the specific characteristics of the fingertip oximeter
introduction. The fingertip oximeter is suitable
for people of all ages, including children children, adults, and
the elderly. It is also necessary for normal people
to monitor their body condition at all times; if you, or your
family or friends, have any of the above mentioned
medical conditions, then it is even more important to have a
fingertip pulse oximeter. It is not only easy to use,
but also safe and hassle-free, eliminating the tedium of waiting in
line to check your body condition anytime and
anywhere.
SpO2 measurement range: 5%-99%
SpO2 accuracy 1: + 2 % in the range of 70 % -99%
+ 2% in the range of 70%-99%
Other scope is not defined
SpO2 Alarm range: Consistent with the display range, the set step
length is 1 %
Pulse cate range: 30 bpm-250 bpm
Pulse rate accuracy: 土1bpm
Pulse rate Alarm range: Consistent with the display range, the set
step length is 5bpm
Data update cycle: 0.25s-2s
SpO2 PR average: 8s
Pulse rate sound: PR tone
Peak Wavelength range: 500 nm-100nm
Maximum optical output power: 150 mW
Pulse rate display: Numeric
Display Specifications: four color OLED,0.96"
Power dissippanon: in normal measurement , less than 10 mA ,in
power off state,less than 50uA
Battery:DC 3V 2*AAA
Finger oximetry monitoring of blood oxygen is a non-invasive
operation that can effectively monitor blood
oxygen in the body and play a key role in predicting changes in the
condition. The normal range for finger
oximetry oxygen saturation is 90%-100%. If it is below 90%, it
indicates that the patient is suffering from
severe hypoxia. Also need to pay attention to long-term clamping
finger pulse easily due to local compression
or cold weather, and affect the peripheral blood circulation of the
finger, resulting in misjudgment, can be
soaked in warm water and then re-monitoring to improve the accuracy
of detection. Patients with severe
pneumonia, chronic obstructive pulmonary disease, sleep apnea, and
patients with recurrent respiratory
failure can be monitored with finger oximetry.
Our Advantages
1. We have been specializing in the production of medical products
line for more than 35 years.
2. Obtained the CE,510K,ROHS,REACH quality system certification and
has passed BSCI,ICS factory audit.
3. We strictly control the quality of raw materials and products in
the production process.
4. Built a mold design team with more than 10 years of experience.
Support OEM and ODM service.According to
customer requirements to develop and design the mold.
5. Advanced laboratory equipment, can carry out a variety of
experimental tests.
Product Name | Digital Fingertip Pulse Oximeter |
Display Type | OLED display |
Display Brightness | 1-4 levels can be adjusted |
Power by | 2 x AAA batteries |
SpO2 | Measurement range: 70%~99% |
PR | Measurement range: 30BPM~240BPM |
Power consumption | below 30mA |
Operation Environment |
Operation Temperature:5℃~40℃ |
Storage Temperature | -10℃~40℃ |
Ambient Humidity | 15%~80% on operation |
Air Pressure | 86kPa~106kPa |
